How to correctly install your new Apple NVME SSD into a MacBookPro or MacBookAir
How to correctly install your new Apple NVME SSD into a MacBookPro or MacBookAir
- When installing the SSD, position the SSD at approximately a 25 degree angle towards SSD slot. (Picture 1)
- Then flatten it down - note SSD is still not fully in its slot (Picture 2)
- Push the SSD with 2 fingers on SSD upper corners in the direction of arrows (Picture 3)
- You may hear a click when the SSD fits correctly into its slot and it looks like this – The SSD is fully in its slot and properly installed (Picture 4)
- Using High Sierra or Mojave USB installer, turn your Mac on and immediately after you hear chime or see the Apple logo, press and hold the Option/Alt key on keyboard, until you see the option to choose Boot drive. Click the USB installer Install macOS Mojave (in this case) to boot from it. (Picture 5)
- Now you should see Mac Utilities. Highlight Install macOS and click Continue (Picture 6)
- The installer offers to setup the installation of macOS, so click Continue (Picture 7)
- Click Agree to agree to the Terms and Conditions (Picture 8)
- The installer asks you to select which drive you want to install macOS on. Select your new SSD, in this case it is an Aura Pro X2. (Picture 9)
- Make sure the new SSD is highlighted where you going to install macOS and click Install (Picture 10)
Once installation is complete, you will go through basic settings to set up your mac, choose your language, keyboard etc... and you are ready to go.
Related Articles
NVME SSD and Apple Macs - Known Issues
Known Issues NVME and Apple Macs have a few known and manageable issues that it can be useful to know about in advance. Most of them are due to running new technologies (NVMe) on an old platform (outdated firmware/software). 1. Boot ROM version/Mac ...How to format your new Apple NVME SSD to APFS
How to format your new Apple NVME SSD to APFS First install your SSD, we have an article all about this here Once you have it installed, boot up your Mac and immediately hold Command (⌘)-R until you are presented to recovery mode. Once there, go to ...Fix to apply when Mac OS 10.13 was not installed prior new NVME SSD installation
For a new NVME SSD to be recognised* by an Apple machine, Mac OS 10.13** or newer would need to be installed before the new NVME SSD is installed. However, if your original SSD suddenly stopped working and you didn't already have Mac OS 10.13 or ...How to clone (copy) data from your old SSD to the new SSD LX300, Aura Pro X2, Aura N2, Aura Pro 6G and Transcend JetDrive SSD using USB enclosure
This article explains how to clone/copy data from your old flash PCIe SSD to the new one using proprietary USB enclosure on MacBook Pro Retina mid 2012-early 2013, MacBook Pro late 2013-Mid 2015, MacBook Air late 2010-2011, MacBook Air late 2012, ...New Transcend Jet drives 820, 725, 720, 520 and 500 SSD's for Macbook Air and Macbook Pro Retina laptops
Transcend Releases JetDrive SSD Upgrade Kits to Boost MacBook Performance and Capacity 25/04/2014 Transcend Information, Inc. (Transcend ), a worldwide leader in storage and multimedia products, is proud to announce the launch of its JetDrive SSD ...