OWC Accelsior 8M2 PCIe 4.0 NVME M.2 SSD adapter card with M.2 NVME SSD installed 16TB - macOS and windows RAID Test Results
Benchmarks
Truth in Numbers:
Another OWC DifferenceThere are many attributes that define “The OWC Difference.” By listing real-world performance tests of OWC solutions, we’re confident you’ll be completely satisfied with your technology investment. Results for 16TB (8 x 2TB) SSD installed.
macOS RAID 0 Test Results
macOS RAID 4 Test Results
Windows RAID 0 Test Results
Related Articles
OWC Envoy Pro FX Thunderbolt 3 / USB-C Portable NVMe M.2 SSD - OWC Drive Guide would not set up drive resulting in error message "Unable to run OWC drive guide"
Problem: The issue is that despite following the directions on my Mac, the installation program will not run, resulting in the error message shown in the attached picture. The second picture shows that I have been trying to run the application from ...NVME SSD and Apple Macs - Known Issues
Known Issues NVME and Apple Macs have a few known and manageable issues that it can be useful to know about in advance. Most of them are due to running new technologies (NVMe) on an old platform (outdated firmware/software). 1. Boot ROM version/Mac ...Install macOS using Internet Recovery option
When it happens you purchased a new NVME SSD for Mac and it comes in raw format with no macOS installed, you can use Internet recovery option to format and install macOS on to your new SSD. 1. Hold down Command-Option/Alt-R and press the Power ...Fix to apply when Mac OS 10.13 was not installed prior new NVME SSD installation
For a new NVME SSD to be recognised* by an Apple machine, Mac OS 10.13** or newer would need to be installed before the new NVME SSD is installed. However, if your original SSD suddenly stopped working and you didn't already have Mac OS 10.13 or ...How to format your new Apple NVME SSD to APFS
How to format your new Apple NVME SSD to APFS First install your SSD, we have an article all about this here Once you have it installed, boot up your Mac and immediately hold Command (⌘)-R until you are presented to recovery mode. Once there, go to ...