Install macOS using Internet Recovery option

When it happens you purchased a new NVME SSD for Mac and it comes in raw format with no macOS installed, you can use Internet recovery option to format and install macOS on to your new SSD.

1. Hold down Command-Option/Alt-R and press the Power button. Hold down those keys until you see a spinning globe and the         message Starting Internet Recovery

Starting Internet Recovery

2. If you get an error with error code, for example, 2005f see below, then you need to reset NVRAM to enable Internet Recovery. 

    To reset NVRAM, see instructions on the picture. After reset, repeat same as per Step 1 to start Internet recovery again.

NVRAM reset

3. Choose your wifi to connect using your wifi password.

    

Choose your wifi network

     

     

     

4. Internet recovery starts, wait until your Mac fully boot up.

     .  

       

    

5. Choose your language and continue to Mac Utilities.

     

    

6. In the Mac utility Click Disk utility.

      

Disk utility

7. From the Left-hand side drop-down menu, click Show all devices.

      

8. Highlight your PCIe media SSD and then click Erase (see arrows). You can give your SSD a name, for example, "My SSD".

    Format to Mac OS Extended (Journaled) and keep Scheme GUID Partition Map.

Please note, if you are using NVME SSD and running on macOS High Siera or newer, you have to format your SSD to APFS.

Erase SSD - use Mac OS Extended Journaled

SSD formatted and ready to use

Quit Disk Utility

9. Quit Disk utility to get back to macOS utilities and click reinstall macOS.

Click reinstall macOS

10. Start the installation of macOS. Click the Continue button.

Start macOS installation

Agree to Terms and Conditions

     

   

11. Select your new SSD to install macOS.

• Related Articles

• My new SSD for Mac is not visible in disk utility when accessed via Internet recovery partitions.

  OWC Aura Pro X2 SSD or any other 3rd party SSD may come with no macOS installed. Therefore, when you install it, Mac will start and display a folder with a question mark because the computer has nothing to boot from. You need to boot into Internet ...

• How to correctly install your new Apple NVME SSD into a MacBookPro or MacBookAir

  How to correctly install your new Apple NVME SSD into a MacBookPro or MacBookAir When installing the SSD, position the SSD at approximately a 25 degree angle towards SSD slot. (Picture 1) Then flatten it down - note SSD is still not fully in its slot ...

• Can I install my own SSD?

  Even if you've installed extra memory in your PC or notebook, the thought of installing your own SSD drive may seem daunting. But rest assured, it's not hard to upgrade from hard disk drive to solid state drive. And recent price drops make ...

• How to clone (copy) data from your old SSD to the new SSD LX300, Aura Pro X2, Aura N2, Aura Pro 6G and Transcend JetDrive SSD using USB enclosure

  This article explains how to clone/copy data from your old flash PCIe SSD to the new one using proprietary USB enclosure on MacBook Pro Retina mid 2012-early 2013, MacBook Pro late 2013-Mid 2015, MacBook Air late 2010-2011, MacBook Air late 2012, ...

• Battery installation video - MacBook Air 2008-2009

  Battery Install for Early 2008 MacBook Air  Early 2008 MacBook Air Battery Install for Late 2008, Mid 2009 MacBook Air  Late 2008, Mid 2009 MacBook Air