Shell Thunder - Checking Your Firmware

Shell Thunder - Checking Your Firmware

Checking Your Firmware

Always check for firmware updates for your SSD! Manufacturers push updates all the time.
Samsung SSD users, please make sure you update your firmware before using it in Thunder using the link below. Otherwise your SSD will not be recognized by your operating system.


    • Related Articles

    • Fledging Shell - Thunder Installation Guide

      Installation1. Install your SSD (see below). 2. Plug in your Shell Thunder. 3. Format your drive using the formatting instructions on the next page. 4. Take flight! Formatting (In Windows): 1. Right click . . 2. Click Disk Management. 3. Right click ...

    • Shell Slim setup guide

      See instructions below for setting up your Shell Slim Shell Slim setup guide

    • Thunder Thermal Pad Instructions

      Thunder Thermal Pad Instructions Why do I need thermal pad?Thermal pad helps to reduce the temperature on your SSD during operation (by at least 15C, depends on SSD you use) and increase your SSD’s longevity. How to apply it?1. Peel one side of ...

    • NVME and Apple Mac Compatibility Chart

      *You can find this information by going to the Apple Logo → About This Mac → System Report **xxx.0.0.0.0 is the new Boot ROM system that came out with Mojave, where “x” indicates any number. This also means your firmware is up to date.

    • Troubleshooting memory problems

      COMMON MEMORY PROBLEMS When you have a problem with memory, the cause is usually one of three things: 1.       Improper Configuration: You have the wrong part for your computer or did not follow the configuration rules. 2.       Improper ...